DELL POWERCONNECT RPS-600 AVAILABLE ON RENTAL & SALE
The Dell Powerconnect RPS-600 is a redundant power supply made specifically for 5000 series and the PowerConnect 3000. The DELL POWERCONNECT RPS-600 is an enterprise type device that will support as much as four switches at a time with 12VDC output signal. Front facing LED lights let you be aware of the status of every switch is stackable saving precious space.Dell Powerconnect Rps-600 on Rental and Sale in Bangalore, Chennai, Hyderabad, Pune, Mumbai, Coimbatore and Kochi.
CALL 8754542653 / 8971423090 FOR ENQUIRY
DELL POWERCONNECT RPS-600 OVERVIEW
More power to you
Dell Powerconnect Rps-600
The PowerConnect RPS-600 Redundant Power Bank provides four external, redundant power supplies for your PowerConnect switches, eliminating the power supply as a single point of failure.
CALL 8754542653 / 8971423090
For Rental or Sale in Bangalore, Chennai, Hyderabad, Pune, Mumbai, Coimbatore & Kochi.
DELL POWERCONNECT RPS-600 SPECIFICATION
Supports up to four PowerConnect switches through 12-V DC output. Dedicated 150-W power supply for up to four connected switches. Front panel LEDs to display status of individual power supplies. 1-U, 19-inch rack mountable system.
DELL RPS-600 VIDEOS
The DELL POWERCONNECT RPS-600 offers enterprise-class redundant power for select PowerConnect™ 3000 and 5000 series switches. It contains four independent 150 W power supplies. The RPS-600 eliminates the switch power supply as a single point of failure and supports up to four PowerConnect™ switches. In case a switch’s power supply fails, the RPS-600 will supply power to the connected switch and keep it powered on. Each connected switch is supported by one of the RPS-600’s four 150 W power supplies. Front-panel LEDs indicate that the unit is either in stand-by or is powering a switch with a failed power supply. The RPS-600 is rack-mountable and consumes only 1 rack-unit of space. Power cables to support up to four switches and rack mounting kit are included. This product has been tested and validated on Dell systems and is compatible with Dell PowerConnect™ 3048, 3248 and 5224 switches. It is supported by Dell Technical Support when used with a Dell system. dell rps 600 manual
Supports up to four PowerConnect switches through 12 VDC output
Dedicated 150 W power supply for up to four connected switches
Front panel LEDs to display status of individual power supplies
1U, 19-inch rack-mountable system
This product has been tested and validated on Dell™ systems
Supported by Dell™ Technical Support when used with a Dell™ system
The dell powerconnect rps-600 specs Redundant Power Bank provides four external,redundant power supplies for your PowerConnect switches, eliminating thepower supply as a single point of failure.Supports up to four PowerConnect switches through 12-V DC output•Dedicated 150-W power supply for up to four connected switches Front panel LEDs to display status of individual power supplies. 1-U, 19-inch rack mountable system.
Dell part number g2886 manufacturer part number power connect rps 600. Dell powerconnect rps720, new open box 0890jn , rps7201 r. Alimentation lectrique dell powerconnect rps 600 manuel d utilisateur. Dell networking 3500 series 3548. Dell part number g2886 manufacturer part number power connect rps 600.
Dell powerconnect rps 600 redundant power supply for select powerconnect 3000 and 5000 series, rack mountable, power supply with four cords and manuals. Dell powerconnect rps 600 pn 6n673 600w power supply. Dell powerconnect rps 600 power supply redundant 600 watt series specifications. Dell powerconnect rps 600 teardown.
Installing the PowerConnect RPS-600 on a Flat Surface
You can install the RPS-600 on any appropriate level surface that can safelysupport the weight of the switches, the RPS-600, and their attached cables.There must be adequate space around the RPS-600 for ventilation and toaccess cable connectors.
To install the RPS-600 on a flat surface: DELL POWERCONNECT RPS-600 for sale
Set the RPS-600 on the flat surface and check for proper ventilation.
Attach rubber feet on each marked location on the bottom of2the chassis.The rubber feet are optional, but recommended to keep the unitfrom slipping.
Installing the PowerConnect RPS-600 in a Rack
The RPS-600 can be installed in most standard 19-inch racks.NOTE: For racks that are not prethreaded, cage nuts are provided.
To install the RPS-600 in a rack:
Use the supplied screws to attach a mounting bracket to each side of1the RPS-600.
Position the RPS-600 in the rack and align the holes in the mounting2bracket with the holes in the rack.
Insert and tighten two screws appropriate for your rack through each of3the mounting brackets.
To operate the RPS-600 after installation:
Plug one end of the switch DC power cord into the connector labeled1″RPS” on the back of the switch. Connect the other end of the switchDC power cord to any available RPS connector on the back of theRPS-600.
Attach the AC power cord to the RPS-600 and to an AC power outlet.2The switch is now using both power supplies simultaneously. You canmonitor the status of the two power supplies through the front panel LEDson your PowerConnect switch and the RPS-600.
The Dell RPS-600 is a redundant power supply specifically designed for the PowerConnect 3000 and 5000 series. The RPS-600 is an enterprise class device that can support up to four switches at a time with 12VDC output. Front facing LED lights allow you to know the status of each switch from a distance, plus the 1U sized chassis is stackable saving valuable space.
- Dell PowerConnect 600W External Power Supply
- Compatible with PowerConnect 3xxx, 52xx, 54xx and 62xx Switches (Non – POE Versions)
- Dedicated 150W power supply for up to four connected switches
- Rackmount 1U
- Input Voltage 90-264 V AC
- Output Voltage: 12V DC
Planning to Buy or Rent
CALL 8754542653 / 8971423090