Cisco Catalyst 3550-24 Smi Switch Available On Rental & Sale
Cisco Catalyst 3550-24 Smi Switch provides a lesser total cost of ownership for deployments that incorporate Cisco IP phones or Cisco Aironet wireless LAN access points. With up to 15 Watts of integrated inline power on every 10/100 port, the switch provides maximum device support and facilitates new technology deployments by removing the need for wall power to each IP phone or wireless LAN access point. Cisco Catalyst 3550-24 Smi on Rental and Sale in Bangalore, Chennai, Hyderabad, Pune, Mumbai, Coimbatore and Kochi.
CALL 8754542653 / 8971423090 FOR ENQUIRY
Cisco Catalyst 3550-24 OVERVIEW
More power to you
Cisco Catalyst 3550-24 smi
CISCO CATALYST 3550-24 SMI SWITCH eliminates the cost for additional electrical cabling that would otherwise be necessary in wireless LAN and IP phone deployments. Maximum power availability for a converged voice and data network is attainable when a ws-c3550-24-emi is combined with the Cisco Redundant Power System 675 (RPS 675) for seamless protection against internal power supply failures and an uninterruptable power supply (UPS) system to safeguard against power outages.
The built-in Gigabit Ethernet ports accommodate a range of GBIC transceivers, including the Cisco GigaStack® GBIC, 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX and CWDM GBICs. The cisco catalyst 3560 eol dual GBIC-based Gigabit Ethernet implementation on the Fast Ethernet configurations provides customers tremendous deployment flexibility—allowing customers to implement one type of stacking and uplink configuration today, while preserving the option to migrate that configuration in the future.
CALL 8754542653 / 8971423090
For Rental or Sale in Bangalore, Chennai, Hyderabad, Pune, Mumbai, Coimbatore & Kochi.
Cisco Catalyst 3550 Switch SPECIFICATION
Cisco catalyst 3550 specs
Cisco Express Forwarding (CEF)-based routing architecture performed in hardware to deliver extremely high-performance IP routing. Support for basic IP unicast routing protocols (static, RIPv1, RIPv2) for small network routing applications.
Support for advanced IP unicast routing protocols (OSPF, IGRP, EIGRP, BGPv4) for load balancing and constructing scalable LANs – requires EMI. Inter-VLAN IP routing for full Layer 3 routing between two or more VLANs.
Cisco 3550-24 VIDEOS
Cisco Catalyst 3550-24 Smi Switch
The Cisco Catalyst 3550-24 SMI switch is a member of the Catalyst 3550 Series Intelligent Ethernet Switches, a line of enterprise-class, stackable, multilayer switches that provide high availability, security and quality of service (QoS) to enhance the operation of the network. With a range of Fast Ethernet and Gigabit Ethernet configurations, the Cisco 3550 Series can serve as both a powerful access layer switch for medium enterprise wiring closets and as a backbone switch for mid-sized networks.
High levels of stack resiliency can also be implemented by deploying dual redundant Gigabit Ethernet uplinks, a redundant GigaStack GBIC loopback cable, UplinkFast and CrossStack UplinkFast technologies for high-speed uplink and stack interconnection failover, and Per VLAN Spanning Tree Plus (PVST+) for uplink load balancing. This Gigabit Ethernet flexibility makes the cisco catalyst 3550 switch an ideal LAN edge complement to the Cisco Catalyst 6500 family of Gigabit Ethernet optimized core LAN switches.
Included with the cisco 3550 12g Catalyst 3550-24, 3550-24 PWR, 3550-24-DC, 3550-24-FX and 3550-48 are the Standard Multilayer Software Image (SMI) or the Enhanced Multilayer Software Image (EMI). The SMI feature set includes advanced QoS, rate-limiting, access control lists (ACLs), and basic static and routed information protocol (RIP) routing functionality.
The Cisco 3550 series offers users and managers the ability to deploy a cost effective, port-dense fast Ethernet switching solution to their small to medium size businesses. Advanced QoS, GBIC Gigabit up-links, and high-performance routing offer an intelligent solution to meets the demands of today’s dynamic IT environments while keeping an eye on the budget.
These cisco catalyst 3550 manual multilayer devices offer investment protection through cisco 3550 layer 3 Inline Power, or Pre-standard PoE, to IP Telephones, Access Points and other PoE compatible PD’s (Powered Devices). Pre-standard power delivers up to 15W of power over standard copper twisted pair cabling. The ability to stack these switches via the integrated GBIC slots allows managers to deploy an array of gigabit interconnect devices and cables to achieve the desired logical aggregation of ports. Stacking also offers resiliency, redundancy and load balancing via Cisco PVST+ (Per VLAN Spanning Tree Plus).
The ws-c3550-24-smi eol ships with Cisco’s SMI, or Standard Multilayer Image, software. This configuration offers Advanced QoS, ACL (Access Control Lists), basic routed and static RIP (routed information protocol) and rate limiting. The Cisco Catalyst 3550-24 PWR inline power switch is a stackable, multilayer, 24-port 10/100 switch with 2 Gigabit Interface Converter (GBIC)-based Gigabit Ethernet ports ideal for integrated voice, video, and data applications.
The Catalyst 3550-24 PWR provides:
- 24 10/100 ports and 2 1000BASE-X Gigabit Ethernet ports
- 1 RU stackable, multilayer switch; integrated inline power
- Delivers enterprise-class intelligent services to the network edge
- SMI installed, upgradeable to EMI with full, dynamic IP routing
- Ideal for access and distribution layer connectivity
- Part numbers: ws-c3550-48, WS-C3550-24PWR-EMI
- ws-c3560v2-48ts-e eol.
The Cisco Catalyst 3550-24 Smi Switch for sale is a member of the Catalyst 3550 Series Intelligent Ethernet Switches, a line of enterprise-class, stackable, multilayer switches that provide high availability, security and quality of service (QoS) to enhance the operation of the network.The foremost feature of the Catalyst 3550 switch series is the CMS or Cisco Cluster Management software that lets you handle multiple Catalyst desktop switches at once using a web browser interface. Now with new configuration wizards, it is easier to implement intelligent services and create a converged network. Take for example, the 3500-24 PWR switch that helps drastically reduce cost of ownership when incorporating Cisco IP phones or even the Aironet wireless LAN Cisco access points. By delivering a decent 15 Watts of inline power integrated on each and every 10/100/1000 port, it eliminates the need to find access to wall power for any WLAN or IP Phone. Moreover, the cost of laying down new cables also comes down as you really don’t need cables to now power such deployments. By combining the 3550 switches with Cisco Redundant Power System 675, you can ensure against power failures and protect against loss of power using a UPS system.
- – 24 10/100 ports and 2 GBIC-based Gigabit Ethernet ports
– 1 rack unit (RU) stackable, multilayer switch upgradeable to full dynamic IP routing
– Delivers intelligent services
– Standard Multilayer Software Image (SMI) installed, upgradeable to Enhanced Standard Multilayer Software Image (EMI)
– Ideal for access and distribution layer connectivity.
Cisco Catalyst 3550 switch for rental
Planning to Buy or Rent
CALL 8754542653 / 8971423090